Short introduction: This little program will help you get headshots. All it does is take a lot of screenshots of the game, a little image analysis, then moves the mouse for you in cs:s. This aimbot is superior to other aimbots out there since it does a bit block transfer directly to an array, then the array is split into colors using minimal cpu usage. All other aimbots that I've encountered use getpixel which is about 200 times slower.
Release date: March 7, 2010 (1.57)
VAC status: By the way it operates it is 100% VAC proof without a doubt. It doesn't modify the game in any way. All it does is take screenshots of the game and move your mouse.
Requirements: There are 3 requirements that should be met before you run this program.
1. You will need colored skin CT models or colored T models which a material wallhack has, the models can be any color.
2. .NET framework 2.0 is required. You should have it already through windows update.
3. VB6 runtime files. All versions of windows currently have it and you can download them if you somehow don't have it.
Solution to problems:
The aimbot is targeting corpses
Type cl_ragdoll_physics_enable 0 in console
I don't know how to install the material wallhack
It tells you on the bottom of the page
The aimbot is shaking too much
Lower the aimbot sensitivity and disable any CSS mouse acceleration
Type cl_showfps 2 in console and change graphic settings to increase FPS to over 60
Try using the default aimbot settings instead of playing with the numbers
The Aimbot does nothing at all
Make sure raw mouse input in css is disabled
You need a colored player model to target, look at the picture below to see what I mean
DISABLE ALL ANTI-ALIASING!
The aimbot keeps aiming upward
Your crosshair is the same color as what you are trying to target, why don't you set the crosshair to green? by typing cl_crosshaircolor 0.
The aimbot aims too slowly
Increase the aimbot sensitivity
What settings should I use with the default aimbot settings
Windows mouse sensitivity should be on the 6th notch, windows enhanced precision disabled, the CSS mouse sensitivity your using should be entered in the aimbot, and CSS mouse acceleration disabled.
Picture of Universal aimbot 1.53
Picture of what I mean by colored models
TURN OFF ANY ANTI-ALIASING
Change log (1.43 - 1.53)
Fixed a handle leak bug when .net 3.5 SP1 wasn't installed, increased long range aimbot precision and tracks far away moving enemies much better, captures and analyzes screenshots slightly faster, takes into account Hz of the monitor and realtime FPS to change sensitivity settings every second, and automatically turns the aero theme on/off for windows 7. Fixed a ton of bugs and removed aimbot acceleration (1.51). Added ability to switch between bitblt and copyfromscreen (1.53). Added ability to change teams using the hotkey X. Added sounds when turning the aimbot on/off and switching teams. Fixed a bug that caused css mouse sensitivity, sensitivity, fps to not change the aimbot sensitivity(1.54).
ON the to do list
Constantly switching to nearby enemies, targeting the name that appears below an enemy, targeting the scoreboard when you press tab, and more responsive on/off toggle.
Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Download link for universal aimbot 1.57: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Dark grid simple version material wallhack: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Normal walls wallhack (90% opacity) good to keep game looking nice: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
NEW: Normal walls version (50% opacity) good to color aimbot most doors/walls: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
NEW: Normal walls version (25% opacity) good to color aimbot all doors/walls: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Full ver download link for advanced users wallhack: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
To install wallhack: Using windows explorer/folder viewer, go to C:\Program Files\Valve\Steam\SteamApps\(your user name here)\counter-strike source\cstrike\ directory. After you go there, you should see a folder called materials. Delete it and copy the materials from the hack to your cstrike directory. You'll then need to restart CSS if it is running already for CSS to load the textures or mat_reloadallmaterials might work as well. Also, what is included is not the full version since it the full version uses about 9mb memory.
To uninstall wallhack: Simply delete the materials folder in your cstrike directory. You'll probably remove some custom map files so you'll have to re-download them, but this is the easiest way.
Release date: March 7, 2010 (1.57)
VAC status: By the way it operates it is 100% VAC proof without a doubt. It doesn't modify the game in any way. All it does is take screenshots of the game and move your mouse.
Requirements: There are 3 requirements that should be met before you run this program.
1. You will need colored skin CT models or colored T models which a material wallhack has, the models can be any color.
2. .NET framework 2.0 is required. You should have it already through windows update.
3. VB6 runtime files. All versions of windows currently have it and you can download them if you somehow don't have it.
Solution to problems:
The aimbot is targeting corpses
Type cl_ragdoll_physics_enable 0 in console
I don't know how to install the material wallhack
It tells you on the bottom of the page
The aimbot is shaking too much
Lower the aimbot sensitivity and disable any CSS mouse acceleration
Type cl_showfps 2 in console and change graphic settings to increase FPS to over 60
Try using the default aimbot settings instead of playing with the numbers
The Aimbot does nothing at all
Make sure raw mouse input in css is disabled
You need a colored player model to target, look at the picture below to see what I mean
DISABLE ALL ANTI-ALIASING!
The aimbot keeps aiming upward
Your crosshair is the same color as what you are trying to target, why don't you set the crosshair to green? by typing cl_crosshaircolor 0.
The aimbot aims too slowly
Increase the aimbot sensitivity
What settings should I use with the default aimbot settings
Windows mouse sensitivity should be on the 6th notch, windows enhanced precision disabled, the CSS mouse sensitivity your using should be entered in the aimbot, and CSS mouse acceleration disabled.
Picture of Universal aimbot 1.53
Picture of what I mean by colored models
TURN OFF ANY ANTI-ALIASING
Change log (1.43 - 1.53)
Fixed a handle leak bug when .net 3.5 SP1 wasn't installed, increased long range aimbot precision and tracks far away moving enemies much better, captures and analyzes screenshots slightly faster, takes into account Hz of the monitor and realtime FPS to change sensitivity settings every second, and automatically turns the aero theme on/off for windows 7. Fixed a ton of bugs and removed aimbot acceleration (1.51). Added ability to switch between bitblt and copyfromscreen (1.53). Added ability to change teams using the hotkey X. Added sounds when turning the aimbot on/off and switching teams. Fixed a bug that caused css mouse sensitivity, sensitivity, fps to not change the aimbot sensitivity(1.54).
ON the to do list
Constantly switching to nearby enemies, targeting the name that appears below an enemy, targeting the scoreboard when you press tab, and more responsive on/off toggle.
Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Download link for universal aimbot 1.57: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Dark grid simple version material wallhack: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Normal walls wallhack (90% opacity) good to keep game looking nice: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
NEW: Normal walls version (50% opacity) good to color aimbot most doors/walls: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
NEW: Normal walls version (25% opacity) good to color aimbot all doors/walls: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
Full ver download link for advanced users wallhack: Ce lien n'est pas visible, veuillez vous connecter pour l'afficher. Je m'inscris!
To install wallhack: Using windows explorer/folder viewer, go to C:\Program Files\Valve\Steam\SteamApps\(your user name here)\counter-strike source\cstrike\ directory. After you go there, you should see a folder called materials. Delete it and copy the materials from the hack to your cstrike directory. You'll then need to restart CSS if it is running already for CSS to load the textures or mat_reloadallmaterials might work as well. Also, what is included is not the full version since it the full version uses about 9mb memory.
To uninstall wallhack: Simply delete the materials folder in your cstrike directory. You'll probably remove some custom map files so you'll have to re-download them, but this is the easiest way.
